102 LPH (27 GHP) Dual HP Pump (100 psi)
SKU: ATL-CFD-650-HP
- CFD-650-HP “Black Box” Kit Includes: Surge Tank:
- • ATL 3-Door Molded (.8 Gallon) Pumps:
- • (2) CFD-104 - 100 psi, 12V Pump Hardware Included:
- • (2) CFD-403 - 5/16” x 16” Flex Tube
- • (2) CFD-205 - “Stubby” Filter • (2) TF602 - #6 Outlet Bulkhead Fitting
- • (2) CFD-504 - Wire Bulkhead Fitting
- • (2) CFD-501 - Wire Harness 40”
Price: $892.40
12 Pack Snap Strap Kit - 18"
SKU: THT-13160
The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap - and more. The high-temperature stainless steel straps are .275" (9/32") in width and have a narrow profile to fit tight spots.
Price: $18.09
2" x 15' Exhaust Wrap
SKU: THT-11152
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
Price: $14.39
24" Plastic Sheet - 22" Wide x 090" Thick
SKU: PS-BLACK
Impact Resistant Flexible Plastic Sheet 24"- 22" Wide x 090" Thick
Price: $3.40
3" Duct Hose Plastic Headlight Duct - 5-1/...
SKU: BB7022
- Plastic Single Headlight 3" Duct
- 5-1/2" H x 7-3/4" W x 4"D
Price: $24.99
3" Duct Hose Plastic Single Bumper - 5" H ...
SKU: BB7009
- •Plastic Single Bumper for 3" Duct Hose
- •3" Diameter
- •5" H x 9-3/4" W x 5-1/2" D
Price: $16.99
3" Duct Single Hose NACA - 10-1/2" L x 6" H
SKU: BB7020
- •Black or Clear Single Hose Duct
- •3" Diameter
- •10-1/2" L x 6" H
Price: $20.49
3" Hose Duct Plastic Dual Bumper Inlet - 5...
SKU: BB7008
- •Plastic Dual Bumper Inlet 3" duct
- •5" H x 9-3/4" W x 5-1/2" D
Price: $19.99
3/8" Dual Feed Assembly for Holley Carbure...
SKU: FCP0101
Aeroquip 3/8" Dual Feed Assembly for Holley Carburetors
Price: $97.99
3M™ Dual Lock™ Reclosed Fastener
SKU: 3M-SJ3540-1
Strong fastener secures with an audible snap, verifying closure.
Price: $2.50
4" x 6" Aluminum Fill Plate
SKU: ATL-TF473
2-1/4” Fill & Flap Valve, #6 Outlet, #6 Vent Valve
Price: $230.40
6" x 10" Aluminum Quick-Fill Plate
SKU: ATL-TF193A
- Aluminum Quick-Fill “Flapper Valve” Assembly:
- 2-1/4” O.D. Fill (45°),
- 1-1/2” O.D. “Bullet” Vent,
- (2) #8 Out., (1) #6 Ret.,
- (1) #6 Dipstick
Price: $387.50
6" x 10" Aluminum Quick-Fill Plate
SKU: ATL-TF193
- Aluminum Quick-Fill “Flapper Valve” Assembly:
- 2-1/4” O.D. Fill (45°),
- 1” O.D. “Bullet” Vent,
- (2) #8 Out.,
- (1) #6 Ret.,
- (1) #6 Dipstick
Price: $387.50
6" x 10" Aluminum Quick-Fill Plate
SKU: ATL-TF624
- 6”x10” Alum. Quick-Fill Plate
4-3/4” B.C., 2-1/2” B.C., (1) #10 Outlet
4-3/4” B.C., 2-1/2” B.C., (1) #10 Outlet