Wire Set, Super Conductor, Multi-Angle Plug, HEI Cap
MSD 8.5mm Super Conductor Universal Spark Plug Wire Sets
The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke".
This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.
- Only 40 - 50 Ohms resistance per foot.
- Over 40 feet of conductor is wound into a foot of wire.
- Outer sleeve provides resistance to high heat and abrasion.
- Available in many custom and universal sets
Dual Crimp Terminals
All of the MSD spark plug terminals feature "Dual Crimp" terminals. As the name implies, the terminals feature two crimps: One for the sleeve of the wire and another separate crimp to grasp the conductor of the wire.
By having separate crimps, the conductor doesn't need to bent 180° and get squeezed between the terminal and sleeve. The individual conductor crimp produces a more secure crimp and there is less chance of spark arcing to the engine block or exhaust through the boot. In fact, we feel so strongly about our Dual Crimp terminals that every factory crimped plug wire is guaranteed not to "pull off" for FIVE years!
MSD Universal Kits have the spark plug terminal and boot installed with the other end of the wire open. This way, you can route the wires the way you like and cut them for a custom fit! A special Mini-Stripper-Crimper Tool is supplied to strip and crimp the wire together.
Boot choices are:
- Multi-Angle (M/A) which are straight, but can be bent over 90°.
- Socket are for the old style "socket" or points style caps.
- HEI boots are 90° that go on a terminal like that of a spark plug and have a nipple on top of the boot for special retainers.
- 90° are also for spark plug style terminals.
|Alternative Part Number 1||N/A|
|Alternative Part Number 2||N/A|
|Alternative Part Number 3||N/A|
|Alternative Part Number 4||N/A|
|Alternative Part Number 5||N/A|
|Alternative Part Number 6||N/A|
|Alternative Part Number 7||N/A|