Davies Craig, EWP LCD DIGITAL CONTROLLER KIT (12/24V)

$215.00
SKU
DC-8000
Davies Craig, LCD EWP & FAN Controller 12 & 24 Volt, The Controller varies the speed of your EWP® looking for, and locking onto your target temp.. Sku: DC-8000, P/n: 8000

Davies Craig, LCD EWP & FAN Controller 12 & 24 Volt, The Controller varies the speed of your EWP® looking for, and locking onto your target temp.. Sku: DC-8000, P/n: 8000

Davies Craig
LCD EWP & FAN Controller 12 & 24 Volt

 


Description
Davies Craig, 8000

The unique LCD EWP®/Fan Digital Controller will manage the operation of your chosen EWP® by varying the speed of your pump in response to coolant temperature and manage control of your electric Thermatic® Fan, No need for a separate thermal switch.

•The Controller varies the speed of your EWP® looking for, and locking onto your target temp.

•If the engine temp goes 3 degrees C over the target, the Controller will run your radiator fan until the target temp is restored.

•12 & 24 Volt

•The updated Davies, Craig LCD EWP®/Fan Digital Controller (#8000) as an engine management component has undergone extensive research, development, vehicle and test centre scrutiny.

Note: This controller (Part No. 8000) is set up for negativley earthed systems however with a wiring adjustment, can also handle positive earthed systems.


Features
Davies Craig, 8000

This LCD EWP®/Fan Digital Controller (Part #8000) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

•Now suitable for all 12v & 24v electrical systems, with relevant displays.

•Prominent Blue Liquid Crystal Display (LCD) Screen

•Genuine Thermometer, with coolant and targeted/set temp. displays

•Diagnostic check & warm-up signals

•Nine (9) targeted/set coolant temperatures, 60C (140F) to 100C (212F)

•Flashing “EWP®” logo signifying water pump in operation

•Davies Craig Thermatic® Fan logo, circulating signifying fan in operation

•Flashing High & Low Voltage indicators

•Low & High Temp indicators

•Audible alarm


Includes
Davies Craig, 8000

•(1) EWP Digital Controller Assembly. P/n: 18000

•(1) Wiring Harness (includes 10AMP fuse). P/n: 8411

•(1) Sensor Assembly. P/n: 8414

•(1) In-Line Adaptor. P/n: 0415

•(2) Hose Clamps. P/n: 8512

•(1) Ring Terminal. P/n: 0574

•(2) Rubber Sleeves. P/n: 8510

•(2) Velcro. P/n: 0615

•(1) Instructions. P/n: 18922

•(1) Sensor Instructions. P/n: 8921


Additional Information
Davies Craig, 8000

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP® by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures, 60ºC (140°F) 65ºC (150°F) 70C (160°F) 75ºC (165°F) 80ºC (175°F) 85ºC (185°F) 90ºC (195°F) 95ºC (205°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature.

A significant benefit too is the Controller allows the EWP® to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.The LCD Digital Controller can be used with Davies Craig EBP however it is not recommended as it will not vary the speed of the pump in response to temperature but rather simply turn the pump on and off once the top end temperature is reached. For a far more economical & appropriate solution, Davies Recommends Part Number 0401 & 0444 to turn the EBP on and off at your set temp.

•Alarm Will Sound If: Coolant temp doesn’t exceed 40ºC (104ºF) within 5 mins of start-up, Coolant temperature exceeds 10ºC (50ºF) of set/target, or Coolant temperature exceeds 100ºC (212ºF)

•Above Set/Target Temperature indicator accompanies audible alarm

•Temperature Sensor short & open circuit indicators

•Automatic time-out, EWP® runs for 3 minutes or until engine temp has reduced to -10â—¦C (-14F) below set/targeted temp whichever occurs first.

More Information
Alternative Part Number 1 DC-8001
Alternative Part Number 2 - None -
Alternative Part Number 3 - None -
Alternative Part Number 4 - None -
Alternative Part Number 5 - None -
Alternative Part Number 6 - None -
Alternative Part Number 7 - None -
Write Your Own Review
You're reviewing:Davies Craig, EWP LCD DIGITAL CONTROLLER KIT (12/24V)
To Top