Ate Racing Brake Fluids

Why use Ate Racing Brake Fluids?


Dry Boiling Point of 536°F and a Wet Boiling Point of 396°F

Ate® Super Blue is identical in specification to the Ate® TYP 200 brake fluid.

Ate® Fluids are compatible and will mix with most DOT3, DOT4, or DOT 5.1 Fluids.

These top-of-the-line product lie 20 °C over the DOT 5.1 standard and surpass this standard in nearly all the other requirements as well. This means that cars can go without a brake fluid change for up to 3 years while products with a lower wet boiling point have to be replaced considerably more often (e.g. DOT 3 products should be replaced annually).

The overall high dry and wet boiling points make these fluids an excellent choice for street driven vehicles where brake fluid is flushed less frequently than in racing cars.

The blue tint of the Ate® Super Blue fluid makes bleeding brakes easy! You can easily tell when you have flushed out the older fluid.

Advantages:

Minimal decrease of boiling point due to excellent water locking properties.

Non-foaming when filling and bleeding the brake system.

Excellent corrosion protection due to selected additives.

High safety tolerance against steam bubbles.

Makes brake fluid changing intervals of up to 3 years possible. TIP: Racers frequently will alternate fluid flushes using both the Super Blue and TYP 200 (Amber). The identical specifications of the fluid and difference in color makes it easy to know when you have completely flushed old fluid out of the system.

Order Ate Racing Brake Fluids